Diesel Pour point depressant, EVA type

WFY 18 Series Efficient EVA type Diesel Pour point depressant

Contact:Misty

Email:banmutang2003@gmail.com

whatsapps:86-13945064260

skype:banmutang2003

The efficient diesel liquidity improvement agent WFY18 series products specifically for domestic and overseas oil refineries to improve the low-temperature liquidity performance of diesel, with significant performance in reducing the cold filter plugging point and pour point of diesel. With the dosage of around 600PPm, the cold filter plugging point of diesel can be reduced by 5~8℃, which leads to extremely favorable performance in improving the quality and yield of diesel refineries. The products adopt ethylene and acetic acid ethylene as the main raw materials, and is processed through high-pressure solution polymerization after the adding of third monomer, and then reconfigured with appropriate amount of dispersant. The whole production process is controlled by DCS computer control system, ensuring stable and reliable product quality, with an annual productivity of 7000 tons.

I. Product specifications

II. Purposes

It is mainly used as the additive to 0#, -10#, -20# and -35# diesel to reduce the cold filter plugging point and pour point of diesel and improve the low-temperature liquidity performance of diesel. It can improve the diesel yield and the economic benefits of refineries, save the energy and increase the utilization ratio of energy, with the performance reaching advanced domestic and overseas technologies.

III. Usage

1. The dosage is usually under 0.1%, and for most refineries, between 0.01~0.06%.

2. The performance not only depends on the performance of the improvement agent itself, but also is closely related to the diesel types and the refinery technologies. To enable better results, experiment shall be carried out before formal application, so that appropriate configuration is determined.

3. During the application, do not add the improvement agent directly into the diesel if possible, as direct adding of it may affect the performance. It shall be first blended into mother liquid, with even mixing of the improvement agent and diesel ensured, so as to achieve the expected performance.

Preparation of mother liquid: Dilute the improvement agent with aviation coal oil or ordinary-pressure diesel, with the ratio between the improvement agent and the diluent in 1:15, and under the operation ambient temperature no less than 50℃, add the mother liquid into the diesel and blend it to even.

IV. Packaging

Packaged in galvanized iron bucket, in net weight of 170kg/barrel.

V．Specification

	WFY18A	WFY18B	WFY18C
Color	Light yellow to amber color	Light yellow to amber color	Light yellow to amber color
Desity（20℃），kg/m3	850～970	850～970	850～970
Pour point℃    ≤	10	20	30
Kinetic Viscosity（50℃），mm2/s	10～200	10～200	10～300

Diesel Pour point depressant, EVA type

WFY 18 Series Efficient EVA type Diesel Pour point depressant

Contact:Misty

Email:banmutang2003@gmail.com

whatsapps:86-13945064260

skype:banmutang2003

The efficient diesel liquidity improvement agent WFY18 series products specifically for domestic and overseas oil refineries to improve the low-temperature liquidity performance of diesel, with significant performance in reducing the cold filter plugging point and pour point of diesel. With the dosage of around 600PPm, the cold filter plugging point of diesel can be reduced by 5~8℃, which leads to extremely favorable performance in improving the quality and yield of diesel refineries. The products adopt ethylene and acetic acid ethylene as the main raw materials, and is processed through high-pressure solution polymerization after the adding of third monomer, and then reconfigured with appropriate amount of dispersant. The whole production process is controlled by DCS computer control system, ensuring stable and reliable product quality, with an annual productivity of 7000 tons.

I. Product specifications

II. Purposes

It is mainly used as the additive to 0#, -10#, -20# and -35# diesel to reduce the cold filter plugging point and pour point of diesel and improve the low-temperature liquidity performance of diesel. It can improve the diesel yield and the economic benefits of refineries, save the energy and increase the utilization ratio of energy, with the performance reaching advanced domestic and overseas technologies.

III. Usage

1. The dosage is usually under 0.1%, and for most refineries, between 0.01~0.06%.

2. The performance not only depends on the performance of the improvement agent itself, but also is closely related to the diesel types and the refinery technologies. To enable better results, experiment shall be carried out before formal application, so that appropriate configuration is determined.

3. During the application, do not add the improvement agent directly into the diesel if possible, as direct adding of it may affect the performance. It shall be first blended into mother liquid, with even mixing of the improvement agent and diesel ensured, so as to achieve the expected performance.

Preparation of mother liquid: Dilute the improvement agent with aviation coal oil or ordinary-pressure diesel, with the ratio between the improvement agent and the diluent in 1:15, and under the operation ambient temperature no less than 50℃, add the mother liquid into the diesel and blend it to even.

IV. Packaging

Packaged in galvanized iron bucket, in net weight of 170kg/barrel.

V．Specification

	WFY18A	WFY18B	WFY18C
Color	Light yellow to amber color	Light yellow to amber color	Light yellow to amber color
Desity（20℃），kg/m3	850～970	850～970	850～970
Pour point℃    ≤	10	20	30
Kinetic Viscosity（50℃），mm2/s	10～200	10～200	10～300

Diesel Pour point depressant, EVA type

WFY 18 Series Efficient EVA type Diesel Pour point depressant

Contact:Misty

Email:banmutang2003@gmail.com

whatsapps:86-13945064260

skype:banmutang2003

The efficient diesel liquidity improvement agent WFY18 series products specifically for domestic and overseas oil refineries to improve the low-temperature liquidity performance of diesel, with significant performance in reducing the cold filter plugging point and pour point of diesel. With the dosage of around 600PPm, the cold filter plugging point of diesel can be reduced by 5~8℃, which leads to extremely favorable performance in improving the quality and yield of diesel refineries. The products adopt ethylene and acetic acid ethylene as the main raw materials, and is processed through high-pressure solution polymerization after the adding of third monomer, and then reconfigured with appropriate amount of dispersant. The whole production process is controlled by DCS computer control system, ensuring stable and reliable product quality, with an annual productivity of 7000 tons.

I. Product specifications

II. Purposes

It is mainly used as the additive to 0#, -10#, -20# and -35# diesel to reduce the cold filter plugging point and pour point of diesel and improve the low-temperature liquidity performance of diesel. It can improve the diesel yield and the economic benefits of refineries, save the energy and increase the utilization ratio of energy, with the performance reaching advanced domestic and overseas technologies.

III. Usage

1. The dosage is usually under 0.1%, and for most refineries, between 0.01~0.06%.

2. The performance not only depends on the performance of the improvement agent itself, but also is closely related to the diesel types and the refinery technologies. To enable better results, experiment shall be carried out before formal application, so that appropriate configuration is determined.

3. During the application, do not add the improvement agent directly into the diesel if possible, as direct adding of it may affect the performance. It shall be first blended into mother liquid, with even mixing of the improvement agent and diesel ensured, so as to achieve the expected performance.

Preparation of mother liquid: Dilute the improvement agent with aviation coal oil or ordinary-pressure diesel, with the ratio between the improvement agent and the diluent in 1:15, and under the operation ambient temperature no less than 50℃, add the mother liquid into the diesel and blend it to even.

IV. Packaging

Packaged in galvanized iron bucket, in net weight of 170kg/barrel.

V．Specification

	WFY18A	WFY18B	WFY18C
Color	Light yellow to amber color	Light yellow to amber color	Light yellow to amber color
Desity（20℃），kg/m3	850～970	850～970	850～970
Pour point℃    ≤	10	20	30
Kinetic Viscosity（50℃），mm2/s	10～200	10～200	10～300

Diesel Pour point depressant, EVA type

WFY 18 Series Efficient EVA type Diesel Pour point depressant

Contact:Misty

Email:banmutang2003@gmail.com

whatsapps:86-13945064260

skype:banmutang2003

The efficient diesel liquidity improvement agent WFY18 series products specifically for domestic and overseas oil refineries to improve the low-temperature liquidity performance of diesel, with significant performance in reducing the cold filter plugging point and pour point of diesel. With the dosage of around 600PPm, the cold filter plugging point of diesel can be reduced by 5~8℃, which leads to extremely favorable performance in improving the quality and yield of diesel refineries. The products adopt ethylene and acetic acid ethylene as the main raw materials, and is processed through high-pressure solution polymerization after the adding of third monomer, and then reconfigured with appropriate amount of dispersant. The whole production process is controlled by DCS computer control system, ensuring stable and reliable product quality, with an annual productivity of 7000 tons.

I. Product specifications

II. Purposes

It is mainly used as the additive to 0#, -10#, -20# and -35# diesel to reduce the cold filter plugging point and pour point of diesel and improve the low-temperature liquidity performance of diesel. It can improve the diesel yield and the economic benefits of refineries, save the energy and increase the utilization ratio of energy, with the performance reaching advanced domestic and overseas technologies.

III. Usage

1. The dosage is usually under 0.1%, and for most refineries, between 0.01~0.06%.

2. The performance not only depends on the performance of the improvement agent itself, but also is closely related to the diesel types and the refinery technologies. To enable better results, experiment shall be carried out before formal application, so that appropriate configuration is determined.

3. During the application, do not add the improvement agent directly into the diesel if possible, as direct adding of it may affect the performance. It shall be first blended into mother liquid, with even mixing of the improvement agent and diesel ensured, so as to achieve the expected performance.

Preparation of mother liquid: Dilute the improvement agent with aviation coal oil or ordinary-pressure diesel, with the ratio between the improvement agent and the diluent in 1:15, and under the operation ambient temperature no less than 50℃, add the mother liquid into the diesel and blend it to even.

IV. Packaging

Packaged in galvanized iron bucket, in net weight of 170kg/barrel.

V．Specification

	WFY18A	WFY18B	WFY18C
Color	Light yellow to amber color	Light yellow to amber color	Light yellow to amber color
Desity（20℃），kg/m3	850～970	850～970	850～970
Pour point℃    ≤	10	20	30
Kinetic Viscosity（50℃），mm2/s	10～200	10～200	10～300

Dye Dispersant NNO

Dye dispersant NNO

Technical Data Sheet

Chemical name: Naphthalinesulfonic acid poly-condensate, sodium salt

Grade:Premium

Item	Requirement
Appearance	Light yellowish powder
PH value	7-9
Solid contents%	≥93
Na2SO4 contents%	≤5
Calcium and magnesium contents%	≤0.15
Free formaldehyde mg/kg	≤200
Water insoluble contents	≤0.15
Fineness(residue from 30µm filter)	≤5

Packing:25kg bags
Welcome to make inquiry

contact:Misty
Email:banmutang2003@gmail.com
whatsapp:86-13945064260
skype:banmutang2003

Sodium lignosulfonate introduction

Brief introduction:  Sodium lignosulphonate’s properties make it suitable for a wide variety of applications in fertilizer, Concrete admixture, Carbon black, Animal feed, and porcelain, etc. It is made from straw.

Synonyms: Sodium lignosulphonate;

HS Code: 380400

Specification

Item	Requirement
Appearance	Dark Brown Powder
Material insolution to water%	≤2.0
Moisture %	≤5.0
Lignosulfonate contents %	45-60%
PH value	8-12

Packing: 25kg craft paper bags with PE film inside

40’HC hold 26mts

Application:

1.Water reducing agent for concrete

2.Ceramic body reinforcing agent:

In ceramic production, SLS can be used as water reducing agent, grinding agent, glaze dispersant. As water reducing agent, dosage is0.3%(w/w), can reduce water by 5% and improve fluidity and make ceramic dry easily; when acting as grinding agent, dosage is about 0.3%(w/w), and increase loading ability by 30% and reducing water contents in ball milling by 10% and shorten the ball milling time by 20%, increasing ball milling efficiency by 25%；as Glaze dispersant, dosage is about 0.5%(w/w), can increase milling efficiency and make color disperse evenly, improve glaze suspension and fluidity and color, can give beautiful flow pattern

3.Mining powder’s binding agent

In mining industry, plant mixed SLS with mining powder and make mining ball, it can also used as ore dressing agent

4. Coal water mixture dispersant

Be used as Coal water mixture dispersant by fire electricity generating plant, increase coal dispersing ability, increase coal heating rate and using rate, sharply decrease coal contents in fly ash and blocking, extend boiler’s life

5. in fertilizer

Pesticide suspension agent and dispersant

Welcome to make inquiry

Misty Liu

Email:lignosale@gmail.com

Tel:86-18945064260

skype:banmutang2003

China lignosulfonate for drilling 2016

Due to China paper plant face big competitor from abroad, they are losing lots of money, so raw material for lignosulfonate--waste liquid from paper plant is less.

now there are only one paper plant, which located in northeast China, use acid paper production way, which can supply wood pulp ligno, but their finished paper products and paper fiber is not competitive in the market, i think that paper plant are facing survival predicament, though it is state owned company. that is a threat of wood pulp lignosulfonate,.
so drilling grade lignosulfonate plants keep trying find new raw material to keep their products.
In the world,only few paper plant has wood source lignosulfonate, mainly in Russia, South Africa and Italy, and abroad products price is high.

if use straw or reed pulp ligno, the performance of ferrochrome ligno will not be as good as what we expected.

moreover, recently that only one China plant adjust their production ways, which affect the lignosulfonate liquid quality. in the past, it is calcium based ligno, currently is magnesium based ligno, finally, it will affect the ferrochrome lignosulfonate quality.

from 2015, customers noticed ferrochrome lignosulfonate quality has been changing, that because expansive raw material drag production plants to bring new raw material in the products.

so i suggest worldwide customers check the new products sample before placing new orders.

on the other hand, due to crude oil price keep decreasing and poor performance in 2015, many drilling wells stop production, business is very slow. demands for drilling grade lignosulfonate slow down.

if lignosulfonate for drilling always keep at high price level, it might be substituted by good performance polymers.

the above words only stand for my own opinion.
Misty
Email:lignosale@gmail.com
April 7, 2016

our Ferrochrome lignosulfonate product

lignosulfonate production show

 Key products